- Model:LW series
- Capstan diameter:from 250mm to 800mm
- Number of blocks:from 1 to 16
- Motor power:from 5.5kw to 75kw for each block
- Max speed:20m/s
Our OTO type wire drawing machine is very costly, if you are just at the beginning to draw wire, especially low carbon wire, maybe such machine is a good choice for you.
Product Description
OTO type wire drawing machine
DescriptionOur OTO type wire drawing machine is very costly, if you are just at the beginning to draw wire, especially low carbon wire, maybe such machine is a good choice for you. we have supply such type machine to many customer all over the world. OTO draw machine, it is no slipping machine, it means that when drawing, the wire is no sliding on the capstan. Steel wire accumulate many on the capstan on the capstan, so operator have enough time to adjust the capstan speed when it is fast then needed, which also is better wire cooling. This type machine also adopt AC frequency inverter to adjust speed. It also applied for production of gas welding wire, arc welding wire, low carbon etc.
Features
1.High effective, higher drawing speed in normal production;
2.Easy operation, delightful man-machine interface;
3.Better processing environment due to install dust protection mechanism;
4.High performance cooling system-water cooling plus high pressure wind cooling ;
5.Flexible control system for optional-Profibus or simulation input/out put ;
6.Long life of capstan, more than 20000 hours.
|
Item |
Unit |
LW9/560 |
LW9/400-360 |
|
Capstan diameter |
mm |
560 |
400-360 |
|
Draw dies |
time |
9 |
9 |
|
Max inlet diameter |
mm |
Φ6.5-5.5 |
Φ3.0-2.5 |
|
Min outlet diameter |
mm |
Φ2-1.7 |
Φ0.9-0.7 |
|
Max drawing speed |
m/min |
600 |
720 |
|
Inlet tensile strength |
Mpa |
≤1300 |
≤1300 |
|
Total compression rate |
% |
90.53 |
91 |
|
Average compression rate |
% |
23.04 |
23.5 |
|
Motor power |
Kw |
30-18.5 |
11-7.5 |
For OTO type wire drawing machine, we have export to Southeast Asia, West Asia, Eastern Europe, South America, the Middle East, Russia, India, Indonesia, Morocco, South Africa, Algeria, Italy, Belarus etc.
Thanks to our partner, many times, without our engineer to visit customer site, customer will run the machine by themself, even they are first time in the drawing field
